R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

Creating a directory

Perform this task in user view.

Task Command

Create a directory. mkdir directory

Removing a directory

To remove a directory, you must delete all files and subdirectories in this directory. To delete a file, use the

delete command. To delete a subdirectory, use the rmdir command.

Removing a directory permanently deletes all its files in the recycle bin, if any.

Perform this task in user view.

Task Command

Remove a directory. rmdir directory

Managing storage media

CAUTION:

To avoid file system corruption, do not perform the following operations:

• Install or remove a storage medium while the system is repairin

, formattin

, mountin

, or unmountin

a storage medium. (On an MSR2000 or MSR3000.)

• Install or remove storage media or cards or perform active/standby switchover while the system is

repairing, formatting, , mounting, or unmounting a storage medium. (On an MSR4000.)

If you remove a storage medium while a folder or file on the storage medium is being accessed, the

device might not recognize the storage medium when you reinstall it. To reinstall this kind of a storage

medium, complete one of the following tasks:

• If you were accessing a folder on the storage medium, change the current directory.

• If you were accessing a file on the storage medium, close the file.

Before you repair or format a USB disk, make sure the disk is not write protected.

Repairing a storage medium

If part of a storage medium is inaccessible, use the fixdisk command to examine and repair the medium.

Before repairing a storage medium, make sure no other users are accessing the medium. Otherwise, the

repair operation fails.

Perform this task in user view.

Task Command

Repair a storage medium. fixdisk medium-name