R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

109
• A command (for example, a hardware-dependent command) cannot be deleted, overwritten, or
undone due to system restrictions.
• The commands in different views are dependent on each other.
• Commands or command settings that the device does not support cannot be added to the running
configuration.
Specifying a next-startup configuration file
You can specify a .cfg configuration file as a main or backup next-startup configuration file when using
the save [ safely ] [ backup | main ] [ force ] command to save the running configuration.
Alternatively, you can execute the startup saved-configuration cfgfile [ backup | main ] command to
specify a configuration file as the main or backup next-startup configuration file. When performing this
task, follow these guidelines:
• For the MSR2000/MSR3000 router, make sure the specified configuration file is valid and saved
to the root directory of the device's storage medium.
• For the MSR4000 router, make sure the specified configuration file is valid and saved to the root
directory of both the active and standby MPUs' storage media.
• If neither backup nor main is specified, this command sets the configuration file as the main
next-startup configuration file.
• Even though the main and backup next-startup configuration files can be the same one, specify
them as separate files for high availability.
• The undo startup saved-configuration command changes the attribute of the main or backup
next-startup configuration file to NULL instead of deleting the file.
To specify a next-startup configuration file, perform the following task in user view:
Task Command Remarks
Specify the next-startup
configuration file.
startup saved-configuration cfgfile
[ backup | main ]
By default, no next-startup
configuration file is specified.
Use the display startup command
and the display
saved-configuration command in
any view to verify the
configuration.
Backing up the main next-startup configuration file
to a TFTP server
Before performing this task, make sure the following requirements are met:
• The server is reachable and enabled with TFTP service.
• You have read and write permissions.
To back up the main next-startup configuration file to a TFTP server: