R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

119
Task Command
Display current software images and startup
software images (on the MSR2000 or MSR3000
router).
display boot-loader
Display current software images and startup
software images (on the MSR4000 router).
display boot-loader [ slot slot-number ]
Non-ISSU software upgrade examples
Upgrade example for MSR2000/MSR3000
Network requirements
Use the file startup-a2105.ipe to upgrade software images for the device.
Figure 48 Network diagram
Configuration procedure
# Configure IP addresses and routes. Make sure the device and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on both the device and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
# Use TFTP to download the image file startup-a2105.ipe from the TFTP server to the root directory of the
CF card.
<Sysname> tftp 2.2.2.2 get startup-a2105.ipe
# (Optional.) Back up the image file to startup-a2105-backup.ipe. Skip this step if the CF card does not
have sufficient space.
<Sysname> copy startup-a2105.ipe startup-a2105_backup.ipe
# Specify startup-a2105.ipe as the main startup image file.
<Sysname> boot-loader file cfa0:/startup-a2105.ipe main
# Specify startup-a2105-backup.ipe as the backup startup image file.
<Sysname> boot-loader file cfa0:/startup-a2105-backup.ipe backup
# Verify the startup image settings.
<Sysname> display boot-loader
# Reboot the device to complete the upgrade.
<Sysname> reboot
TFTP client
TFTP server
Device
2.2.2.2/24
Internet
1.1.1.1/24