R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

125
Task Command
Reboot the device. (On an MSR2000 or MSR3000.) reboot
Reboot the current MPU. (On an MSR4000.) reboot
Displaying device information in emergency shell
mode
Execute display commands in any view.
Task Command
Display copyright information. display copyright
Display software package information. display install package package
Display management Ethernet port information.
display interface m-eth0
Display IPv4 routing information. display ip routing-table
Display IPv6 routing information. display ipv6 routing-table
Display boot image version information. display version
Emergency shell usage example
Network requirements
The device has only the boot image (boot.bin) and enters emergency shell after startup. The device and
PC can reach each other.
Use the TFTP client service on the device to download system image system.bin from the PC and start the
Comware system on the device.
Figure 50 Network diagram
Usage procedure
# Check which files are stored and how much space is available on the storage medium of the device.
<boot> dir
Directory of flash:
0 drw- 5954 Apr 26 2014 21:06:29 logfile
1 -rw- 1842 Apr 27 2014 04:37:17 boot.bin
2 -rw- 1518 Apr 26 2014 12:05:38 startup.cfg
3 -rw- 2045 May 04 2014 15:50:01 backcfg.cfg