R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

129

{ A temporary IP address.

{ A configuration file name.

{ A TFTP server domain name.

{ A TFTP server IP address.

{ A DNS server IP address.

For more information, see "Automatic-configuration parameter acquisition process."

3. After

getting automatic configuration parameters, the device tries to download a configuration file

from a TFTP server. For more information, see "Configuration file acquisition process."

4. If the device obtains a c

onfiguration file, it deletes its temporary settings to restore the factory

defaults and executes the configuration file. If the device does not obtain a configuration file or

fails to execute the configuration file, the device deletes its temporary settings and stays quiet for

30 seconds. Then, the device tries again for automatic configuration by selecting another qualified

interface and repeating Step 2 to Step 4. To stop the automatic configuration process, press Ctrl+D

at the CLI of the device.

IMPORTANT:

• To ensure quick and successful automatic confi

uration of a device, connect only the interface used fo

automatic configuration to the network.

• The device does not save the obtained configuration file. To use the configuration after a reboot, save the

running configuration by using the save command. Otherwise, the device has to perform automatic

configuration again after a reboot. For more information about the save command, see

Fundamental

Command Reference