R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

139
******************************************************************************
* Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
To enable displaying the copyright statement:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable displaying the
copyright statement.
copyright-info enable By default, this function is enabled.
Configuring banners
Banners are messages that the system displays when a user logs in.
Banner types
The system supports the following banners:
• Legal banner—Appears after the copyright or license statement. To continue login, the user must
enter Y or press Enter. To quit the process, the user must enter N. Y and N are case insensitive.
• Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.
• Login banner—Appears only when password or scheme authentication is configured.
• Incoming banner—Appears for Modem users.
• Shell banner—Appears for non-Modem users.
Banner input modes
You can configure a single-line banner or a multiline banner:
• Single-line banner.
A single-line banner must be input in the same line as the command. The start and end delimiters
for the banner can be any printable character. However, they must be the same and must not be
included in the banner. The input text, including the command keywords and the delimiters, cannot
exceed 510 characters. Do not press Enter before you input the end delimiter.
For example, you can configure the shell banner "Have a nice day." as follows:
<System> system-view
[System] header shell %Have a nice day.%
• Multiline banner.
A multiline banner can be up to 2000 characters. To input a multiline banner, use one of the
following methods:
{ Method 1—Press Enter after the final command keyword, enter the banner as prompted, and
end the final line with the delimiter character %. For example, you can configure the banner
"Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell