R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

142
Configuration guidelines
• The default system time is always restored at reboot. To make sure a task schedule can be executed
as expected, reconfigure the system time or configure NTP after you reboot the device. For more
information about NTP, see Network Management and Monitoring Configuration Guide.
• Make sure all commands in a schedule are compliant to the command syntax. The system does not
check the syntax when you assign a command to a job.
• A schedule cannot contain any of these commands: telnet, ftp, ssh2, and monitor process.
• A schedule does not support user interaction. If a command requires a yes or no answer, the system
always assumes that a Y or Yes is entered. If a command requires a character string input, the
system assumes that either the default character string (if any) is entered, or a null string is entered.
• A schedule is executed in the background, and no output (except for logs, traps, and debug
information) is displayed for the schedule.
Configuration procedure
To configure a one-time schedule for the device:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a job.
scheduler job job-name By default, no job exists.
3. Assign a command to the
job.
command id command
By default, no command is assigned
to a job.
You can assign multiple commands
to a job. A command with a smaller
ID will be executed first.
4. Create a schedule.
scheduler schedule schedule-name By default, no schedule exists.
5. Assign a job to a
schedule.
job job-name
By default, no job is assigned to a
schedule.
You can assign multiple jobs to a
schedule. The jobs will be executed
concurrently.
6. Assign user roles to the
schedule.
user-role role-name
By default, a schedule has the user
role of the schedule creator.
You can use this command to assign
up to 64 user roles to a schedule. A
command in a schedule can be
executed if it is permitted by one or
more user roles of the schedule.