R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

144
Schedule configuration example
Network requirements
As shown in Figure 55, two interfaces of the device are connected to users.
To save energy, configure the device to perform the following tasks:
• Enable the interfaces at 8:00 a.m. every Monday through Friday.
• Disable the interfaces at 18:00 every Monday through Friday.
Figure 55 Network diagram
Scheduling procedure
# Enter system view.
<Sysname> system-view
# Configure a job for disabling interface GigabitEthernet 2/1/1.
[Sysname] scheduler job shutdown-GigabitEthernet2/1/1
[Sysname-job-shutdown-GigabitEthernet2/1/1] command 1 system-view
[Sysname-job-shutdown-GigabitEthernet2/1/1] command 2 interface gigabitethernet 2/1/1
[Sysname-job-shutdown-GigabitEthernet2/1/1] command 3 shutdown
[Sysname-job-shutdown-GigabitEthernet2/1/1] quit
# Configure a job for enabling interface GigabitEthernet 2/1/1.
[Sysname] scheduler job start-GigabitEthernet2/1/1
[Sysname-job-start-GigabitEthernet2/1/1] command 1 system-view
[Sysname-job-start-GigabitEthernet2/1/1] command 2 interface gigabitethernet 2/1/1
[Sysname-job-start-GigabitEthernet2/1/1] command 3 undo shutdown
[Sysname-job-start-GigabitEthernet2/1/1] quit
# Configure a job for disabling interface GigabitEthernet 2/1/2.
[Sysname] scheduler job shutdown-GigabitEthernet2/1/2
[Sysname-job-shutdown-GigabitEthernet2/1/2] command 1 system-view
[Sysname-job-shutdown-GigabitEthernet2/1/2] command 2 interface gigabitethernet 2/1/2
[Sysname-job-shutdown-GigabitEthernet2/1/2] command 3 shutdown
[Sysname-job-shutdown-GigabitEthernet2/1/2] quit
# Configure a job for enabling interface GigabitEthernet 2/1/2.
[Sysname] scheduler job start-GigabitEthernet2/1/2
[Sysname-job-start-GigabitEthernet2/1/2] command 1 system-view
Device
PC 1 PC 2
GE2/1/2GE2/1/1