R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

153
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Disable all USB interfaces.
usb disable By default, all USB interfaces are enabled.
Setting the operating mode of an interface card
Some interface cards can operate in multiple modes to provide different types of interfaces.
To set the operating mode of an interface card on an MSR2000 or MSR3000:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the operating mode of an
interface card.
card-mode slot slot-number
mode-name
The value range for the mode-name
argument varies by interface card type.
To set the operating mode of an interface card on an MSR4000:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the operating mode of an
interface card.
card-mode slot slot-number
subslot subslot-number
mode-name
The value range for the mode-name
argument varies by interface card type.
Verifying and diagnosing transceiver modules
Verifying transceiver modules
You can use one of the following methods to verify the genuineness of a transceiver module:
• Display the key parameters of a transceiver module, including its transceiver type, connector type,
central wavelength of the transmit laser, transfer distance, and vendor name.
• Display its electronic label. The electronic label is a profile of the transceiver module and contains
the permanent configuration, including the serial number, manufacturing date, and vendor name.
The data is written to the storage component during debugging or testing.
To verify transceiver modules, execute the following commands in any view:
Task Command Remarks
Display the key parameters of
transceiver modules.
display transceiver { interface
[ interface-type interface-number ] }
N/A
Display the electrical label
information of transceiver
modules.
display transceiver manuinfo
interface [ interface-type
interface-number ] }
This command cannot display
information for some transceiver
modules.