R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

47
Ste
p
Command Remarks
2. Enter console/AUX line
view or class view.
• Enter console/AUX line view:
line { aux | console }
first-number [ last-number ]
• Enter console/AUX line class
view:
line class { aux | console }
A setting in user line view is applied only to
the user line. A setting in user line class
view is applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user. A
setting in user line class view takes effect
only for users who log in after the
configuration is completed. It does not
affect online users.
3. Enable scheme
authentication.
authentication-mode scheme
By default, authentication is disabled for
the console line and password
authentication is enabled for the AUX line.
By default, authentication is disabled for
the AUX line.
To use scheme authentication, you must also complete the following tasks:
• Configure login authentication methods in ISP domain view.
• To use a remote server for the authentication, configure a RADIUS, HWTACACS, or LDAP scheme.
• To perform local authentication, configure a local user and the relevant attributes.
For more information, see Security Configuration Guide.
The next time you log in through the console or AUX port, you must provide the configured login
username and password, as shown in Figure 18 and Figure 19.
Figure 18 Schem
e
authentication interface for console login