R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

48
Figure 19 Scheme authentication interface for AUX login
Configuring common console/AUX line settings
Some common settings configured for a console or AUX line take effect immediately and can interrupt
the current session. Use a login method different from console/AUX login to log in to the device before
you change console/AUX line settings.
To log in through the console/AUX port after you configure console/AUX line settings, change the
terminal settings on the configuration terminal to match the line settings.
To configure common settings for a console/AUX line:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter console/AUX
line view or class
view.
• Enter console/AUX line view:
line { aux | console } first-number
[ last-number ]
• Enter console/AUX line class
view:
line class { aux | console }
A setting in user line view is applied only to
the user line. A setting in user line class
view is applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user. A
setting in user line class view takes effect
only for users who log in after the
configuration is completed. It does not
affect online users.
3. Set the baud rate.
speed speed-value
By default, the baud rate is 9600 bps.
This command is not available in
console/AUX line class view.
4. Specify the parity
check mode.
parity { even | mark | none | odd |
space }
By default, the parity check mode is none,
and no parity check is performed.
This command is not available in
console/AUX line class view.