R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

50
Ste
p
Command Remarks
14. Set the session idle
timeout.
idle-timeout minutes [ seconds ]
The default is 10 minutes.
If there is not any interaction between the
device and the user within the idle timeout,
the system automatically terminates the
user connection on the user line.
If you set the idle timeout to 0, the session
will not be aged out.
15. Specify a command
to be automatically
executed when a
user logs in through
the lines.
auto-execute command command
By default, no command is specified for a
user line to be automatically executed.
The device will automatically execute the
specified command when a user logs in
through the user line, and close the user
connection after the command is executed.
This command is not available in console
line view or console line class view.
This command is not available in AUX line
view or AUX line class view.
16. Disable the terminal
service.
undo shell
Be default, the terminal service is enabled
on all user lines.
This command is not available in console
line view or console line class view.
This command is not available in AUX line
view or AUX line class view.
Logging in through Telnet
You can Telnet to the device to remotely manage the device, or use the device as a Telnet client to Telnet
to other devices to manage them.
By default, Telnet login is disabled on the device. To log in to the device through Telnet, you must do the
following:
• Log in to the device through any other method.
• Enable the Telnet server.
• Configure Telnet login authentication.
NOTE:
Telnet login is not supported in FIPS mode.