R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

52
Figure 20 Telnetting to the device without authentication
Configuring password authentication for Telnet login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable Telnet server.
telnet server enable
By default, the Telnet server function is
disabled.
3. Enter VTY line view or
class view.
• Enter VTY line view:
line vty first-number [ last-number ]
• Enter VTY line class view:
line class vty
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user lines
of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class
view.
A setting in user line view takes effect
immediately and affects the online user.
A setting in user line class view takes
effect only for users who log in after the
configuration is completed. It does not
affect online users.