R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

55
Figure 22 Scheme authentication interface for Telnet login
Setting the maximum number of concurrent Telnet users
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the maximum number of
concurrent Telnet users.
aaa session-limit telnet
max-sessions
By default, the maximum number of concurrent
Telnet users is 32.
Changing this setting does not affect users who
are currently online. If the current number of
online Telnet users is equal to or greater than the
new setting, no additional Telnet users can log in
until online users log out.
For more information about this command, see
Security Command Reference.
Setting the DSCP value for outgoing Telnet packets
The DSCP value is carried in the ToS/Traffic class field of an IP or IPv6 packet, and it indicates the
transmission priority of the packet.
To set the DSCP value for outgoing Telnet packets:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the DSCP value for
outgoing Telnet packets.
• For a Telnet server running IPv4:
telnet server dscp dscp-value
• For a Telnet server running IPv6:
telnet server ipv6 dscp dscp-value
By default, the DSCP value is 48.