R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

65
Ste
p
Command Remarks
14. (Optional.) Set the idle timeout
for the redirected connection.
redirect timeout time
By default, the idle timeout for the
Telnet redirected connection is
360 seconds.
15. (Optional.) Disable Telnet
option negotiation for the
redirected connection.
redirect refuse-negotiation
By default, Telnet option
negotiation is enabled for the
redirected connection.
16. (Optional.) Manually terminate
the redirected Telnet
connection.
redirect disconnect N/A
17. Exit to system view.
quit N/A
18. (Optional.) Associate the Telnet
redirect listening port with an IP
address.
ip alias ip-address port-number
By default, a Telnet redirect
listening port is not associated with
any IP address.
User login procedure
To Telnet to a management device (for example Device C in Figure 31), a user must do the following:
1. Run a terminal emulation program on the PC and create a connection to Device C.
In the following example, the PC is running Windows XP and HyperTerminal.
Figure 32 Creating a connection
2. Configure connection parameters:
a. Select TCP/IP (Winsock) for the connection.
b. Set the server IP address to 192.168.100.240.
c. Set the port number to the Telnet redirect listening port number (6067, in this example).
d. Click OK.