R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

77
Ste
p
Command Remarks
3. Enable scheme
authentication.
authentication-mode scheme
By default, authentication is disabled for
the console line and password
authentication is enabled for the AUX line.
By default, authentication is disabled for
the AUX line.
In VTY line view, this command is
associated with the protocol inbound
command. If you specify a non-default
value for only one of the two commands in
VTY line view, the other command uses the
default setting, regardless of the setting in
VTY line class view.
4. Enable command
accounting.
command accounting
By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
Configuration example
Network requirements
As shown in Figure 39, users need to log in to the device to manage the device.
Configure the device to send commands executed by users to the HWTACACS server to monitor and
control user operations on the device.
Figure 39 Network diagram
Configuration procedure
# Enable the Telnet server.
<Device> system-view
[Device] telnet server enable