R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

87
Task Command Remarks
Upload a file to the FTP server. put localfile [ remotefile ] N/A
Download a file from the FTP
server.
get remotefile [ localfile ] N/A
Add the content of a file on the
FTP client to a file on the FTP
server.
append localfile [ remotefile ] N/A
Specify the retransmit marker. restart marker
Use this command together with the put,
get, or append command.
Update the local file. newer remotefile N/A
Get the missing part of a file. reget remotefile [ localfile ] N/A
Rename the file.
rename [ oldfilename
[ newfilename ] ]
N/A
Changing to another user account
After you log in to the FTP server with one user account, you can change to another user account to get
a different privilege without reestablishing the FTP connection. You must correctly enter the new username
and password. A wrong username or password can cause the FTP connection to disconnect.
To change to another user account, execute the following command in user view:
Task Command
Change to another user account. user username [ password ]
Maintaining and troubleshooting the FTP connection
Task Command Remarks
Display FTP commands on the FTP
server.
rhelp N/A
Display FTP commands help information
on the FTP server.
rhelp protocol-command N/A
Display FTP server status. rstatus N/A
Display detailed information about a
directory or file on the FTP server.
rstatus remotefile N/A
Display FTP connection status. status N/A
Display the system information of the FTP
server.
system N/A
Enable or disable FTP operation
information display.
verbose By default, this function is enabled.
Enable or disable FTP client debugging. debug
By default, FTP client debugging is
disabled.
Clear the reply information in the buffer. reset N/A