R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

Configuration procedure

# Configure IP addresses as shown in Figure 43. Make sure the device and PC can reach each other.

(Details not shown.)

# Examine the storage space of the device. If the free space is insufficient, use the delete/unreserved

file-url command to delete unused files. (Details not shown.)

# L o g i n t o t h e F T P s e r v e r a t 10 .1.1.1 u s i n g t h e u s e r n a m e abc and password 123 456 .

<Sysname> ftp 10.1.1.1

Press CTRL+C to abort.

Connected to 10.1.1.1 (10.1.1.1).

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User (10.1.1.1:(none)): abc

331 Give me your password, please

Password:

230 Logged in successfully

Remote system type is MSDOS.

ftp>

# Set the file transfer mode to binary.

ftp> binary

200 TYPE is now 8-bit binary

# Download the file temp.bin from the PC to the device.

ftp> get temp.bin

local: temp.bin remote: temp.bin

150 Connecting to port 47457

226 File successfully transferred

23951480 bytes received in 95.399 seconds (251.0 kbyte/s)

# Set the file transfer mode to ASCII. Upload the configuration file startup.cfg from the device to the PC

for backup.

ftp> ascii

200 TYPE is now ASCII

ftp> put startup.cfg back-startup.cfg

local: startup.cfg remote: back-startup.cfg

150 Connecting to port 47461

226 File successfully transferred

3494 bytes sent in 5.646 seconds (618.00 kbyte/s)

ftp> bye

221-Goodbye. You uploaded 2 and downloaded 2 kbytes.

221 Logout.

FTP client configuration example (MSR4000)

Network requirements

As shown in Figure 44, the PC is acting as an FTP server. A user account with the username abc and

password 123456 has been created on the PC.

• Use the device as an FTP client to log in to the FTP server.