R0106-HP MSR Router Series Interface Command Reference(V7)

1
Bulk interface configuration commands
display interface range
Use display interface range to display information about the interface ranges created with the interface
range name command.
Syntax
display interface range [ name name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name name: Specifies an interface range by its name, a case-sensitive string of 1 to 32 characters. If you
do not specify an interface range name, this command displays information about all existing interface
ranges.
Examples
# Display information about the interface ranges created with the interface range name command.
<Sysname> display interface range
Interface range name t2 gigabitethernet 2/1/1 gigabitethernet 2/1/2
Interface range name test gigabitethernet 2/1/6 gigabitethernet 2/1/7
The output shows the following:
• Interfaces GigabitEthernet 2/1/1 and GigabitEthernet 2/1/2 are added to interface range
named t2.
• Interfaces GigabitEthernet 2/1/6 and GigabitEthernet 2/1/7 are added to interface range
named test.
Related commands
interface range name
interface range
Use interface range to create an interface range and enter the interface range view.
Syntax
interface range interface-list
Views
System view