R0106-HP MSR Router Series Interface Command Reference(V7)

102
Default
The line code format is B8ZS for the CT1/PRI interface.
Views
CT1/PRI interface view
Predefined user roles
network-admin
Parameters
ami: Specifies the AMI line code format.
b8zs: Specifies the bipolar 8-zero substitution (B8ZS) line code format.
Usage guidelines
A CT1/PRI interface must use the same line code format as its remote end.
If the AMI format is used, configure the data-coding inverted command on the interface to ensure its
operation.
Examples
# Set the line code format of the T1 2/4/0 to AMI.
<Sysname> system-view
[Sysname] controller t1 2/4/0
[Sysname-T1 2/4/0] code ami
Related commands
data-coding
controller t1
Use controller t1 to enter CT1/PRI interface view.
Syntax
controller t1 number
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies a CT1/PRI interface by its number.
Examples
# Enter the view of T1 2/4/0.
<Sysname> system-view
[Sysname] controller t1 2/4/0
[Sysname-T1 2/4/0]