R0106-HP MSR Router Series Interface Command Reference(V7)

109
Syntax
Idle-code { 7e | ff }
undo idle-code
Default
The line idle code is 0x7E.
Views
CT1/PRI interface view
Predefined user roles
network-admin
Parameters
7e: Sets the line idle code to 0x7E.
ff: Sets the line idle code to 0xFF.
Usage guidelines
The line idle code is sent in the timeslots that are not bundled into the logical channels on the interface.
Examples
# Set the line idle code to 0x7E on T1 2/4/0.
<Sysname> system-view
[Sysname] controller t1 2/4/0
[Sysname-T1 2/4/0] idlecode 7e
itf (CT1/PRI interface)
Use itf to set the type and the number of interframe filling tags on a CT1/PRI interface.
Use undo itf to restore the default.
Syntax
itf { number number | type { 7e | ff } }
undo itf { number | type }
Default
The interframe filling tag is 0x7E. The number of interframe filling tags is 4.
Views
CT1/PRI interface view
Predefined user roles
network-admin
Parameters
number number: Sets the number of interframe filling tags, in the range of 0 to 14. An interframe filling
tag is one byte in length.
type: Specifies the interframe filling tag type.
7e: Specifies the interframe filling tag type 0x7E.