R0106-HP MSR Router Series Interface Command Reference(V7)

116
Field Descri
p
tion
Source Clock Source clock: master for internal clock and slave for line clock.
Idle code Idle code: 7e or ff.
Itf type Interframe filling tag: 7e or ff.
Itf number Number of interframe filling tags.
Loopback Whether loopback is configured on the interface.
Last clearing of counters Most recent time when statistics for the interface was cleared.
Data in current interval (19349
seconds elapsed):
Loss Frame Alignment: 129
seconds, Framing Error: 0 seconds
CRC Error: 0 seconds, Alarm
Indication: 0 seconds
Loss-of-signals: 129 seconds,
Code Violations: 0 seconds
Slip: 0 seconds, E-Bit Error: 0
seconds
Time duration that each error lasts within the interval. The errors
include frame misalignment, frame errors, alarms, loss of signals,
code violation, and frame slipping.
fe1 alarm-detect
Use fe1 alarm-detect to enable RAI detection on an interface.
Use undo fe1 alarm-detect to disable RAI detection on an interface.
Syntax
fe1 alarm-detect rai
undo fe1 alarm-detect rai
Default
RAI detection is enabled on an E1-F interface.
Views
E1-F interface view
Predefined user roles
network-admin
Parameters
rai: Remote Alarm Indication (RAI).
Usage guidelines
This command is applicable when the interface operates in framed mode.
Examples
# Disable RAI detection on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] undo fe1 alarm-detect rai