R0106-HP MSR Router Series Interface Command Reference(V7)

128
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 286 seconds
Data in Interval 1:
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 901 seconds
Slip: 22 seconds, Fr Loss: 901 seconds
Line Err: 0 seconds, Degraded: 0 minutes
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 901 seconds
Data in Interval 2:
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 900 seconds
Slip: 23 seconds, Fr Loss: 900 seconds
Line Err: 0 seconds, Degraded: 0 minutes
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 900 seconds
Total Data (last 2 15 minute intervals):
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 2087 seconds
Slip: 52 seconds, Fr Loss: 2087 seconds
Line Err: 0 seconds, Degraded: 0 minutes
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 2087 seconds
Table 16 Command output
Field Descri
p
tion
Input/Output Statistics about the input and output.
Basic Configuration Basic configurations for the interface.
Work mode T1 interface operating mode: T1 or CT1.
Cable type
Cable type of the interface, 100 ohm balanced in this
sample output.
Frame-format Frame format configured on the interface: ESF or SF.
fdl FDL format: ANSI, ATT, or none.
Line code AMI or B8ZS.
Source Clock
Source clock used by the interface: master for the
internal clock or slave for the line clock.
Data-coding Normal or inverted.
Idle code Idle code: 0x7E or 0xFF.
Itf type Type of inter-frame filling tags: 0x7E or 0xFF.
Itf number Number of inter-frame filling tags.
Loop back
Loopback setting on the interface: local, payload,
remote, or not set.
Receiver alarm state is Loss-of-Signal Type of received alarm: none, LOS, LOF, RAI, or AIS.
Transmitter is sending remote alarm Type of transmitted alarm: RAI or none.