R0106-HP MSR Router Series Interface Command Reference(V7)

179
[Sysname-T3 2/4/0] t1 1 unframed
Related commands
t1 channel-set
using
Use using to configure the operating mode of a CT3 interface.
Use undo using to restore the default.
Syntax
using { ct3 | t3 }
undo using
Default
A CT3 interface operates in channelized mode.
Views
CT3 interface view
Predefined user roles
network-admin
Parameters
ct3: Sets the CT3 interface to operate in channelized mode.
t3: Sets the CT3 interface to operate in unchannelized mode.
Usage guidelines
You can only configure T1 lines on CT3 interfaces operating in channelized mode.
When a CT3 interface operates in unchannelized mode, the system automatically creates a
44.736-Mbps serial interface numbered serial number/0:0 for it. This interface has the same logical
features as a standard synchronous serial interface. You can configure this serial interface in the same
way you configure a standard synchronous serial interface.
Examples
# Configure T3 2/4/0 to operate in unchannelized mode.
<Sysname> system-view
[Sysname] controller t3 2/4/0
[Sysname-T3 2/4/0] using t3