R0106-HP MSR Router Series Interface Command Reference(V7)

180
POS interface commands
The following matrix shows the support of MSR routers for the POS interface commands:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 Yes
MSR4000 Yes
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Standard POS interface view, POS channel interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of POS 2/2/0 to 50 kbps.
<Sysname> system-view
[Sysname] interface pos 2/2/0
[Sysname-Pos2/2/0] bandwidth 50
clock
Use clock to set the clock mode of a POS interface.
Use undo clock to restore the default.