R0106-HP MSR Router Series Interface Command Reference(V7)

185
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
down: Displays physically down interfaces and their down causes. If you do not specify this keyword, this
command displays information about interfaces in any state.
Usage guidelines
If you do not specify the pos keyword, this command displays information about all interfaces on the
device.
If you specify the pos keyword without specifying an interface, this command displays information about
all POS interfaces.
Examples
# Display detailed information about POS 2/2/0.
<Sysname> display interface pos 2/2/0
Pos2/2/0
Current state: DOWN
Line protocol state: DOWN
Description: Pos2/2/0 Interface
Bandwidth: 50kbps
Maximum Transmit Unit: 1500
Dampening enabled:
Penalty: 0 (not suppressed)
Ceiling: 4525
Reuse: 800
Suppress: 3000
Half-life: 2 seconds
Max-suppress-time: 5 seconds
Flap count: 0
Hold timer: 10 seconds
Internet Address: 5.5.5.2/24 Primary
Link layer protocol: PPP
LCP: opened, IPCP: opened
Physical layer: Packet Over SONET, Baudrate: 155520000 bps
Scramble: enabled, crc: 32, clock: slave, loopback: not set
SONET alarm:
section layer: OOF LOF LOS
line layer: AIS
path layer: AIS RDI
C2(Rx): 0xff, C2(Tx): 0x16
J0(Rx): unknown
J0(Tx): ""
J1(Rx): unknown
J1(Tx): ""
SONET error:
section layer: B1 65535
line layer: B2 0 M1 0