R0106-HP MSR Router Series Interface Command Reference(V7)

192
frame-format
Use frame-format to set the framing format on a POS interface.
Use undo frame-format to restore the default.
Syntax
frame-format { sdh | sonet }
undo frame-format
Default
The framing format is SDH.
Views
Standard POS interface view
Predefined user roles
network-admin
Parameters
sdh: Specifies the SDH framing format.
sonet: Specifies the SONET framing format.
Usage guidelines
When you use the flag j0 and flag j1 commands to set the overhead bytes, the settings must match the
framing format.
Examples
# Set the framing format on POS 2/2/0 to SDH.
<Sysname> system-view
[Sysname] interface pos 2/2/0
[Sysname-Pos2/2/0] frame-format sdh
Related commands
• flag j0
• flag j1
interface pos
Use interface pos to enter standard POS interface view or POS channel interface view.
Syntax
interface pos interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a POS interface or POS channel interface by its number.