R0106-HP MSR Router Series Interface Command Reference(V7)

200
description
Use description to configure a description for a CPOS interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a CPOS interface is in interface name Interface format, for example, Cpos2/4/0
Interface.
Views
CPOS interface view
Predefined user roles
network-admin
Parameters
text: Specifies an interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Configure the description of CPOS 2/4/0 as CPOS-interface.
<Sysname> system-view
[Sysname] controller cpos 2/4/0
[Sysname-Cpos2/4/0] description CPOS-interface
display controller cpos
Use display controller cpos to display status information for CPOS interfaces.
Syntax
display controller cpos [ cpos-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
cpos-number: Specifies a CPOS interface by its number. If no CPOS number is specified, this command
displays the information about all CPOS interfaces.
Usage guidelines
This command also displays alarms and errors that occurred to the regenerator section, multiplex section,
and higher-order path.
The following table lists the possible error types in the command output.