R0106-HP MSR Router Series Interface Command Reference(V7)

12
Table 2 Command output
Field Description
Interface Abbreviated interface name.
Total (pkts/sec)
Average rate (in pps) of receiving or sending packets during the statistics
polling interval.
Broadcast (pkts/sec)
Average rate (in pps) of receiving or sending broadcast packets during the
statistics polling interval. On an RPR physical port, all broadcast and multicast
packets received or sent are displayed as multicast packets.
Multicast (pkts/sec)
Average rate (in pps) of receiving or sending multicast packets during the
statistics polling interval. On an RPR physical port, all broadcast and multicast
packets received or sent are displayed as multicast packets.
Overflow: more than 14
decimal digits
The command displays Overflow if the data length of a statistical item is
greater than 14 decimal digits.
--: not supported The statistical item is not supported.
Related commands
• flow-interval
• reset counters interface
display ethernet statistics
Use display ethernet statistics to display the Ethernet statistics.
Syntax
MSR2000/MSR3000:
display ethernet statistics
MSR4000:
display ethernet statistics slot slot-number
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Displays the Ethernet statistics on the specified card. The slot-number argument
represents the number of the slot that houses the card. (MSR4000)
Examples
# (MSR2000/MSR3000) Display the Ethernet statistics.
<Sysname> display ethernet statistics
ETH receive packet statistics:
Totalnum : 10447 ETHIINum : 4459
SNAPNum : 0 RAWNum : 0