R0106-HP MSR Router Series Interface Command Reference(V7)

202
Frame-format: ESF, clock: slave, loopback: none
CT1 3 is down
Frame-format: ESF, clock: slave, loopback: none
…
CT1 83 is down
Frame-format: ESF, clock: slave, loopback: none
CT1 84 is down
Frame-format: ESF, clock: slave, loopback: none
Table 22 Command output
Field Description
Current state Current physical state of the CPOS interface.
Description Interface description.
Frame-format SDH, multiplex AU-4,
clock master, loopback none
Physical layer information of the CPOS interface:
• The framing format is SDH.
• The multiplexing path is AU-4.
• The clock mode is master.
• Loopback is disabled.
SD threshold: 6 , SF threshold: 3 SD threshold and SF threshold of the CPOS interface.
Optical Transmission medium.
Tx: J0 Transmitted overhead bytes.
Rx: J0 Received overhead bytes.
Alarm Alarm statistics.
Error Error statistics.
Higher order Path(VC-4-1)
Higher-order path. The multiplex path is AU-4. There is only one
VC-4 for STM-1.
CT1 1 is down The physical state of T1 channel is down.
Frame-format: ESF, clock: slave,
loopback: none
Physical layer information for the T1 channel:
• The framing format is ESF.
• The clock mode is slave.
• Loopback is disabled.
Related commands
• display controller cpos e1
• display controller cpos t1
display controller cpos e1
Use display controller cpos e1 to display status information for an E1 channel on a CPOS interface.
Syntax
display controller cpos cpos-number e1 e1-number