R0106-HP MSR Router Series Interface Command Reference(V7)

215
Predefined user roles
network-admin
Usage guidelines
The shutdown command on the CPOS physical interface shuts down All E1/T1 channels and serial
interfaces formed by timeslot bundles. As a result, they stop transmitting and receiving data. To bring up
them, use the undo shutdown command on the CPOS physical interface.
Examples
# Shut down CPOS 2/4/0.
<Sysname> system-view
[Sysname] controller cpos 2/4/0
[Sysname-Cpos2/4/0] shutdown
t1 channel-set
Use t1 channel-set to bundle timeslots on a T1 channel.
Use undo t1 channel-set to remove the bundle.
Syntax
t1 t1-number channel-set set-number timeslot-list range [ speed { 56k | 64k } ]
undo t1 t1-number channel-set set-number
Default
A T1 channel is not channelized.
Views
CPOS interface view
Predefined user roles
network-admin
Parameters
t1-number: Specifies a T1 channel by its number on the CPOS interface. The value range for this
argument is 1 to 84.
set-number: Specifies a channel set by its number in the range of 0 to 23.
timeslot-list range: Specifies a comma-separated list of timeslot items. An item can be an individual
timeslot or a timeslot range. Use a hyphen (-) to separate the start and end timeslot numbers of a range.
The value range for the timeslot number is 1 to 24.
speed: Specifies how timeslots are bundled. If the 56k keyword applies, timeslots form an N × 56 kbps
bundle. If 64k applies, timeslots form an N × 64 kbps bundle. If the speed is not specified, the default
64 kbps applies.
Usage guidelines
The serial interface formed by a timeslot bundle uses the interface number/channel number:channel set
number format.