R0106-HP MSR Router Series Interface Command Reference(V7)

223
Syntax
default
Views
ATM interface view (including four physical types: OC-3c/STM-1, ADSL 2+, G.SHDSL, SHDSL_4WIRE,
and SHDSL_8WIRE_BIS)
ATM subinterface view
EFM interface view (physical type: SHDSL_8WIRE_BIS)
EFM subinterface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the display this command in interface view to check
for these commands, and use their undo forms or follow the command reference to restore their
respective default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings of interface ATM 2/4/0.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] default
description
Use description to configure the description for an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an ATM interface is interface name Interface, for example, ATM 2/4/0 Interface.
Views
ATM interface view (including four physical types: OC-3c/STM-1, ADSL 2+, SHDSL_4WIRE, and
SHDSL_8WIRE_BIS)
ATM subinterface view
EFM interface view (physical type: SHDSL_8WIRE_BIS)
EFM subinterface view