R0106-HP MSR Router Series Interface Command Reference(V7)

226
Field Descri
p
tion
Internet protocol processing
IP packet processing capability. Disabled indicates no IP
address is configured, and the interface cannot process IP
packets. If an IP address is configured, the field name changes
to Internet Address is.
AAL enabled
AAL type enabled on the interface. The ATM interface supports
only ATM Adaptation Layer 5 (AAL5).
Current VCs: 0 (0 on main interface)
Number of virtual circuits configured on the interface. Contents
in the parentheses indicate the number of virtual circuits
configured on the primary interface.
ATM over E1 Type of the interface.
Scramble Scrambling state of the interface.
Frame-format
Frame format of the interface:
• SDH STM-1
• SONET OC-3
• CRC4 ADM
• No-CRC4 ADM
• ESF ADM
• SF ADM
• G.751ADM
• G.751 PLCP
• G.823 ADM
• C-bit ADM
• C-bit PLCP
• M23 ADM
• M23 PLCP
Code Line coding format of the interface: AMI, HDB3 or B8ZS.
Clock Clock mode of the interface: master or slave.
Cable length
Cable mode of the interface:
• long—Long-haul mode, with cable length in the range of 151
to 500 meters.
• short—Short-haul mode, with cable length in the range of 0
to 150 meters.
Loopback
Loopback mode of the interface:
• cell—Internal cell loopback.
• local—Internal loopback.
• payload—External payload loopback.
• remote—External line loopback.
Line Error
Line error of the interface:
• FERR—Framing bit error.
• LCV—Line code violation.
• CERR—CRC errors.
• FEBE—Far-end block error.