R0106-HP MSR Router Series Interface Command Reference(V7)

229
Syntax
interface atm { interface-number | interface-number.subnumber [ p2mp | p2p ] }
undo interface atm interface-number.subnumber
Default
No ATM subinterface exists.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies an ATM interface by its number.
interface-number.subnumber: Specifies an ATM subinterface by its number. The interface-number
argument represents the number of the ATM interface. The subnumber argument represents the number
of the subinterface, in the range of 0 to 1023.
p2mp: Specifies a point-to-multipoint subinterface. A subinterface is P2MP type by default.
p2p: Specifies a point-to-point subinterface.
Examples
# Enter ATM 2/4/0 interface view.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0]
# Create ATM subinterface ATM 2/4/0.1 and enter its view.
<Sysname> system-view
[Sysname] interface atm2/4/0.1
[Sysname-ATM2/4/0.1]
mtu
Use mtu to set the MTU value for an interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of an interface is 1,500 bytes.
Views
ATM interface view (including four physical types: OC-3c/STM-1, ADSL 2+, SHDSL_4WIRE, and
SHDSL_8WIRE_BIS)
ATM subinterface view
EFM interface view (physical type: SHDSL_8WIRE_BIS)