R0106-HP MSR Router Series Interface Command Reference(V7)

238
Predefined user roles
network-admin
network-operator
Parameters
interface atm interface-number: Specifies an ADSL interface by its number.
Examples
# Display the configurations for ADSL interface ATM 1/0.
<Sysname> display dsl configuration interface atm 1/0
Line Params Set by User:
Standard: T1.413
Annex: A
Coding Gain(dB): Auto
Tx Pow Attn(dB): 0
Bit-Swap: disable
Actual Config Near End Far End
Standard: T1.413 T1.413
Trellis Coding: Enable Enable
Vendor ID: 0x0039 0x0004
AS0 (DS) LS0(US)
Rate(Bytes): 238 26
Rate(kbps): 7616 832
Latency: Intlv Intlv
Table 26 Command output
Field Descri
p
tion
The following configuration information is always displayed:
Standard
Available standard (which can be configured with the adsl standard command):
• Auto-negotiation (default).
• ADSL2 (G992.3).
• ADSL2+ (G992.5).
• G.DMT (G992.1).
• G.Lite (G992.2).
• T1.413.
Annex
Annex standard used by the line (predefined and not configurable):
• A—Annex A, indicating ADSL over POTS.
• B—Annex B, indicating ADSL over ISDN.
Coding Gain(dB)
Coding gain in dB (predefined and not configurable). Auto indicates that the
interface automatically negotiates the coding gain.
Tx Pow Attn(dB) Transmission power attenuation in dB (predefined and not configurable).
Bit-Swap Bit switch function state (predefined and not configurable): enable or disable.
The following information is displayed when the line is up: