R0106-HP MSR Router Series Interface Command Reference(V7)

239
Field Descri
p
tion
Standard
Standard that takes effect on the interface:
• Auto-negotiation (default).
• ADSL2 (G992.3).
• ADSL2+ (G992.5).
• G.DMT (G992.1).
• G.Lite (G992.2).
• T1.413.
Trellis Coding Trellis coding state: Enable or Disable.
Vendor ID Vendor ID of the chip.
Rate(Bytes)
Negotiation rate in bytes:
• AS0 (DS)—Downlink rate.
• LS0 (US)—Uplink rate.
Rate(kbps)
Negotiation rate in kbps:
• AS0 (DS)—Downlink rate.
• LS0 (US)—Uplink rate.
Latency
Data coding mode:
• Fast—Fast mode, with short line delay but low line quality.
• Interleave—Interleave mode, with high error correction capacity but long line
delay.
display dsl status
Use display dsl status to display the status information for an ADSL interface.
Syntax
display dsl status interface atm interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface atm interface-number: Specifies an ADSL interface by its number.
Examples
# Display the status information for ADSL interface ATM 1/0.
<Sysname> display dsl status interface atm 1/0
Line Status: Loss Of Signal
Training Status: Idle
Active Params Near End Far End
Standard: G.dmt G.dmt
SNR (dB): 0.0 0.0