R0106-HP MSR Router Series Interface Command Reference(V7)

243
display dsl configuration
Use display dsl configuration to display the configurations for a G.SHDSL interface.
Syntax
display dsl configuration interface atm interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface atm interface-number: Specifies a G.SHDSL interface by its number.
Examples
# Display the configurations for G.SHDSL interface ATM 1/0.
<Sysname> display dsl configuration interface atm 1/0
Line parameter and mode configuration:
Mode: CPE
Standard: G.991.2
Annex: B
Wire type: 2
Line rate: Auto Adaptive
Current margin: 2
SNEXT margin: 0
PSD mode: Sym PSD
Actual handshake status:
00: 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000
10: 0000 0008 0000 0000 0000 0000 0000 0000 0008 0000
20: 0000 0000 0002 0002 0004 0010
Local handshake status:
00: 0002 0001 0000 0000 0000 0000 0034 003f 003f 003f
10: 003f 003f 0003 0034 003f 003f 003f 003f 003f 0003
20: 0000 0000 0003 0003 000f 0010
Remote handshake status:
00: 0002 0000 0000 0000 0000 0000 0030 003f 003f 003f
10: 003f 000f 0000 0030 003f 003f 003f 003f 000f 0000
20: 0000 0000 0003 0003 0003 0004 0010
Table 29 Command output
Field Description
Mode Operating mode: CPE or CO.