R0106-HP MSR Router Series Interface Command Reference(V7)

244
Field Description
Standard
Available standard (predefined and not configurable):
• G.SHDSL (G991.2).
• G.SHDSL.bis (G.BIS).
Annex
Annex standard used by the line:
• A—Annex A.
• B—Annex B.
Wire type Wire type: two-wire or four-wire.
Current margin Current SNR margin.
SNEXT margin Lowest SNR margin.
PSD mode PSD mode: symmetric or asymmetric.
display dsl status
Use display dsl status to display status information for a G.SHDSL interface.
Syntax
display dsl status interface atm interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface atm interface-number: Specifies a G.SHDSL interface by its number.
Examples
# Display status information for ATM 1/0 when this two-wire G.SHDSL interface is up.
<Sysname> display dsl status interface atm 1/0
Operating Mode: CPE
DSL Mode: SHDSL Annex B
Configured Wire Type: 2
Line A Statistics since last activation:
CRC: 0
LOSW Defect: 0
ES: 0
SES: 0
UAS: 0
TX EOC: 0
RX EOC: 0
Line A status:
Xcvr Op State: Data Mode
Last Fail Op State: 0x00