R0106-HP MSR Router Series Interface Command Reference(V7)

248
Parameters
interface atm interface-number: Specifies a G.SHDSL interface by its number.
Examples
# Display the version information and available capabilities for G.SHDSL interface ATM 1/0.
<Sysname> display dsl version interface atm 1/0
DSL Line Type: G.SHDSL
ATM SAR Device: 0x823614f1
ATM SAR Revision: 0x02
Chipset Vendor: GSPN
Firmware Rel-Rev: R2.3.1-0
DSP Version: 1
PCB Version: 0.0
CPLD Version: 0.0
Driver Version: 2.0
Hardware Version: 1.0
ITU G991.2 ANNEX A: Supported
ITU G991.2 ANNEX B: Supported
Table 31 Command output
Field Description
ATM SAR Device Identification of the SAR chip.
ATM SAR Revision Revision identification of the SAR chip.
Firmware Rel-Rev
Identification and version information about
FirmWare.
ITU G991.2 ANNEX A, ITU G991.2 ANNEX B Available standards and annex standards.
shdsl annex
Use shdsl annex to set the annex standard for a G.SHDSL interface.
Use undo shdsl annex to restore the default.
Syntax
shdsl annex { a | b }
undo shdsl annex
Default
The annex standard is Annex B.
Views
ATM SHDSL_4WIRE interface view, ATM SHDSL_8WIRE_BIS interface view
Predefined user roles
network-admin
Parameters
a: Specifies the Annex A standard.