R0106-HP MSR Router Series Interface Command Reference(V7)

250
[Sysname-ATM1/0] shdsl capability g-shdsl
Related commands
shdsl mode
shdsl line-probing
Use the shdsl line-probing enable command to enable SHDSL line probing.
Use the undo shdsl line-probing enable command to disable SHDSL line probing.
Syntax
shdsl line-probing enable
undo shdsl line-probing enable
Default
SHDSL line probing is enabled.
Views
ATM SHDSL_8WIRE_BIS interface view
Predefined user roles
network-admin
Usage guidelines
With line probing enabled, the system performs the line probing function to find the highest possible data
transmission rate during line activation.
With line probing disabled, the system chooses the highest data transmission rate from the data
transmission rates supported by both the CPE and CO. The amount of time available for activating the
SHDSL lines is reduced because the line rate adaptation process is skipped.
Examples
# Disable SHDSL line probing on interface ATM 1/0.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-ATM1/0] undo shdsl line-probing enable
Related commands
activate
shdsl mode
Use shdsl mode to set the operating mode for a G.SHDSL interface.
Use undo shdsl mode to restore the default.
Syntax
shdsl mode { co | cpe }
undo shdsl mode
Default
A G.SHDSL interface operates in CPE mode.