R0106-HP MSR Router Series Interface Command Reference(V7)

261
Output: 0 packets, 0 bytes, 0 buffers
0 broadcasts, 0 multicasts
0 errors, 0 overflows, 0 underruns
# Display brief information about interface EFM 4/0.
<Sysname> display interface efm 4/0 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
EFM2/4/0 UP UP --
# Display brief information about all EFM interfaces in physically DOWN state and the causes.
<Sysname> display interface efm brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
EFM4/0 DOWN Not connected
Table 33 Command output
Field Descri
p
tion
EFM4/0
Current state
Physical and administrative states of the interface:
• DOWN (Administratively)—The interface is shut down with
the shutdown command, and the interface is
administratively down.
• DOWN—The interface is administratively up but physically
down (typically because no physical link is present or the link
has failed).
• UP—The interface is both physically and administratively up.
Line protocol state Link layer protocol state of the interface: UP or DOWN.
Hold timer Poll interval.
Internet protocol processing Internet layer protocol processing state: enabled or disabled.
8Wire-Shdsl Line The wire mode is 8Wire-Shdsl.
Operation State
Operating state:
• DOWN_NOT_READY—The line is down and not ready.
• DOWN_ READY—The line is down and ready.
• INITIALIZING—The line is in negotiation.
• UP_DATA_MODE—The line is up and in data mode.
Operating Mode Operating mode: CO or CPE.
Last clearing of counters: Never
Time when the reset counters interface command was last used
to clear the interface statistics.
Never indicates the reset counters interface command has never
been used on the interface after the device started up.
Last 5 seconds input rate 0.00 bytes/sec, 0
bits/sec, 0.00 packets/sec
Average input rate over the most recent 5 seconds:
• bytes/sec—Average bytes input every second.
• packets/sec—Average packets input every second.