R0106-HP MSR Router Series Interface Command Reference(V7)

264
interface-number.subnumber: Specifies an EFM subinterface by its number. The interface-number
argument represents the number of the EFM interface. The subnumber argument represents the number
of the subinterface, in the range of 1 to 4094. You can create a maximum of 1024 EFM subinterfaces on
an EFM interface.
Examples
# Enter EFM 2/4/0 interface view.
<Sysname> system-view
[Sysname] interface efm 2/4/0
[Sysname-EFM2/4/0]
# Create EFM subinterface EFM 2/4/0.1 and enter its view.
<Sysname> system-view
[Sysname] interface efm 2/4/0.1
[Sysname-EFM2/4/0.1]
shdsl annex
Use shdsl annex to set the annex standard for an EFM interface. You cannot activate a link with different
standard types at its two ends.
Use undo shdsl annex to restore the default.
Syntax
shdsl annex { a | b }
undo shdsl annex
Default
The annex standard is Annex B.
Views
EFM SHDSL_8WIRE_BIS interface view
Predefined user roles
network-admin
Parameters
a: Specifies the Annex A standard.
b: Specifies the Annex B standard.
Usage guidelines
Both Annex A and Annex B are G.991.2 standards. Annex A is dominant in North America and Annex
B is dominant in Europe. When you set the annex standard, consider the standard used in your region.
Examples
# Set EFM interface EFM 2/4/0 to adopt annex A.
<Sysname> system-view
[Sysname] interface efm 2/4/0
[Sysname-EFM2/4/0] shdsl annex a