R0106-HP MSR Router Series Interface Command Reference(V7)

265
shdsl capability
Use shdsl capability to set the capacity type for an EFM interface.
Use undo shdsl capability to restore the default.
Syntax
shdsl capability { auto | g-shdsl | g-shdsl-bis }
undo shdsl capability
Default
In CPE mode, the auto type is applied.
In CO mode, the g-shdsl-bis type is applied.
Views
EFM SHDSL_8WIRE_BIS interface view
Predefined user roles
network-admin
Parameters
auto: Specifies the auto type (available only in CPE mode).
g-shdsl: Specifies the G.SHDSL type.
g-shdsl-bis: Specifies the G.SHDSL.bis type.
Usage guidelines
In CPE mode, the g-shdsl, g-shdsl-bis, and auto keywords are available.
In CO mode, only the g-shdsl and g-shdsl-bis keywords are available.
When you configure the shdsl mode command, the default settings in each mode are automatically
restored.
Interfaces on the two ends must be configured with the same capacity type.
Examples
# Set the capacity type for interface EFM 2/4/0 to G.SHDSL.
<Sysname> system-view
[Sysname] interface efm 2/4/0
[Sysname-EFM2/4/0] shdsl capability g-shdsl
Related commands
shdsl mode
shdsl line-probing
Use shdsl line-probing enable to enable SHDSL line probing.
Use undo shdsl line-probing enable to disable SHDSL line probing.
Syntax
shdsl line-probing enable
undo shdsl line-probing enable