R0106-HP MSR Router Series Interface Command Reference(V7)

30
Examples
# Enter GigabitEthernet 2/0/1 interface view.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1]
# Create Ethernet subinterface GigabitEthernet 2/0/1.1 and enter GigabitEthernet 2/0/1.1 subinterface
view.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1.1
[Sysname-GigabitEthernet2/0/1.1]
jumboframe enable
Use jumboframe enable to allow jumbo frames within the specified length to pass through.
Use undo jumboframe enable to prevent jumbo frames from passing through.
Syntax
jumboframe enable [ value ]
undo jumboframe enable
Default
The device allows jumbo frames within a specified length to pass through.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
value: Sets the maximum length of Ethernet frames that are allowed to pass through..
The following matrix shows the supported maximum values for the value argument:
Hardware Maximum value
MSR2000 1536
MSR3000 1536
MSR4000
HMIM-8GSW/HMIM-24GSW/HMIM-24GSW-POE
interfaces: 2048
Other interfaces: 1536
Usage guidelines
If you set the value argument multiple times, the most recent configuration takes effect.
Examples
# Enable jumbo frames to pass through GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] jumboframe enable