R0106-HP MSR Router Series Interface Command Reference(V7)

35
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1.1
[Sysname-GigabitEthernet2/0/1.1] shutdown
[Sysname-GigabitEthernet2/0/1.1] undo shutdown
speed
Use speed to set the speed of an Ethernet interface.
Use undo speed to restore the default.
Syntax
speed { 10 | 100 | 1000 | 10000 | auto }
undo speed
Default
The speed of an Ethernet interface is autonegotiated.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
10: Sets the interface speed to 10 Mbps.
100: Sets the interface speed to 100 Mbps.
1000: Sets the interface speed to 1000 Mbps.
10000: Sets the interface speed to 10000 Mbps.
The following matrix shows the support of MSR routers for the 10000 keyword:
Hardware Ke
y
word com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000
10-GE interface: Yes
Other interfaces: No
auto: Enables the interface to negotiate a speed with its peer.
Usage guidelines
For an Ethernet copper port, use the speed command to set its speed to match the speed of the peer
interface.
For an optical port, use the speed command to set its speed to match the rate of a transceiver module.
Examples
# Configure GigabitEthernet 2/0/1 to autonegotiate the speed.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1