R0106-HP MSR Router Series Interface Command Reference(V7)

54
Table 9 Command output
Field Description
Async2/4/0
Current state
Physical state of the asynchronous interface:
• DOWN (Administratively)—The interface has been shut down
by using the shutdown command.
• DOWN—The interface is physically down because no physical
link is present or the physical link has failed.
• UP—The interface is both administratively and physically up.
Line protocol current state Link protocol state of the interface.
Description Description for the interface.
Bandwidth Intended bandwidth of the interface.
Maximum Transmit Unit Maximum Transmission Unit (MTU) of the interface.
Hold timer Interval at which the interface sends keepalive packets.
Internet protocol processing Network layer protocol processing state.
Link layer protocol PPP Link layer protocol of the interface.
LCP: initial LCP has been successfully initialized.
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Information about the urgent, protocol, and FIFO output queues:
• Size—Number of packets in the queue.
• Length—Maximum number of packets that the queue can
contain.
• Discards—Number of dropped packets.
Last clearing of counters
Most recent time the reset counters interface command was
executed. If you have never executed the reset counters interface
command, the field displays Never.
Physical layer Physical layer information.
Baudrate Baudrate of the interface.
Last 300 seconds input rate: 0.00
bytes/sec, 0 bits/sec, 0.00 packets/sec
Average input rates (in Bps, bps, and pps) for the last 300
seconds.
Last 300 seconds output rate: 0.00
bytes/sec, 0 bits/sec, 0.00 packets/sec
Average output rates (in Bps, bps, and pps) for the last 300
seconds.