R0106-HP MSR Router Series Interface Command Reference(V7)

71
Syntax
async-mode { flow | protocol }
undo async-mode
Default
An AM interface operates in flow mode.
Views
AM interface view
Predefined user roles
network-admin
Parameters
flow: Configures the interface to operate in flow mode (interactive mode).
protocol: Configures the interface to operate in protocol mode.
Examples
# Configure Analogmodem 2/4/0 to operate in flow mode.
<Sysname> system-view
[Sysname] interface analogmodem 2/4/0
[Sysname-Analogmodem2/4/0] async-mode protocol
display interface analogmodem
Use display interface analogmodem to display information about an AM interface.
Syntax
display interface [ analogmodem [ interface-number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies an AM interface by its number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
down: Displays physically down interfaces and their down causes. If you do not specify this keyword, the
command displays information about interfaces in all states.
Usage guidelines
If you do not specify the analogmodem keyword, this command displays information about all interfaces
on the device.