R0106-HP MSR Router Series Interface Command Reference(V7)

78
Parameters
mrusize: Sets the MRU. The value range for this argument is 4 to 1700 bytes.
Usage guidelines
This command applies to only interfaces operating in asynchronous flow mode.
Examples
# Set the MRU of Analogmodem 2/4/0 operating in flow mode to 1500 bytes.
<Sysname> system-view
[Sysname] interface analogmodem 2/4/0
[Sysname-Analogmodem2/4/0] async-mode flow
[Sysname-Analogmodem2/4/0] phy-mru 1500
Related commands
async-mode
reset counters interface
Use reset counters interface to clear AM interface statistics.
Syntax
reset counters interface [ analogmodem [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
analogmodem interface-number: Specifies an AM interface by its number.
Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
• If you do not specify the analogmodem keyword, this command clears statistics for all interfaces.
• If you specify the analogmodem keyword without specifying an interface, this command clears
statistics for all AM interfaces.
• If you specify an AM interface, this command clears statistics for the specified interface.
Examples
# Clear statistics for Analogmodem 2/4/0.
<Sysname> reset counters interface analogmodem 2/4/0
Related commands
display interface analogmodem
ISDN BRI interface commands