R0106-HP MSR Router Series Interface Command Reference(V7)

81
Interface Link Cause
Bri2/4/0 ADM Administratively
Table 12 Command output
Field Description
Bri2/4/0
Current state
Physical state of the interface:
• DOWN (Administratively)—The interface has been shut down
by using the shutdown command.
• DOWN—The interface is physically down because no physical
link is present or the physical link has failed.
• UP—The interface is both administratively and physically up.
Line protocol state Link protocol state of the interface.
Description Description of the interface.
Bandwidth Intended bandwidth of the interface.
Maximum Transmit Unit MTU of the BRI interface.
Baudrate Baudrate of the BRI interface.
Timeslot(s) Used Time slot used by the BRI interface.
Internet protocol processing Network layer protocol processing state.
Link layer protocol PPP Link layer protocol of the interface.
LCP: initial LCP has been successfully initialized.
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Information about the urgent, protocol, and FIFO output queues:
• Size—Number of packets in the queue.
• Length—Maximum number of packets that the queue can
contain.
• Discards—Number of dropped packets.
Last clearing of counters
Most recent time the reset counters interface command was
executed. If you have never executed the reset counters interface
command, the field displays Never.
Last 5 seconds input rate 0.00 bytes/sec,
0 bits/sec, 0.00 packets/sec
Average input rates (in Bps, bps, and pps) for the last 5 seconds.
Last 5 seconds output rate 0.00
bytes/sec, 0 bits/sec, 0.00 packets/sec
Average output rates (in Bps, bps, and pps) for the last 5 seconds.