R0106-HP MSR Router Series Interface Command Reference(V7)

82
Field Description
Input: 0 packets, 0 bytes
0 errors, 0 runts, 0 giants
0 crc, 0 align errors, 0 overruns
0 aborts, 0 no buffers
0 frame errors
Incoming traffic statistics for the BRI interface:
• errors—Number of incoming error packets detected at the
physical layer.
• runts—Number of incoming undersized packets.
• giants—Number of incoming oversized packets.
• crc—Number of incoming normal-size packets with CRC
errors.
• align errors—Number of incoming packets with alignment
errors.
• overruns—Number of packet drops because the input rate of
the interface exceeded the queuing capability.
• aborts—Number of invalid incoming packets.
• no buffers—Number of packet drops because the receive
buffer is full.
• frame errors—Number of packets with framing errors.
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
Outgoing traffic statistics for the BRI interface:
• errors—Number of error packets detected at the physical layer.
• underruns—Number of packets that fail to be forwarded
because the interface reads from memory at a slower speed
than it forwards packets.
• collisions—Number of packets that the interface stopped
transmitting because packet collisions were detected during
transmission.
• deferred—Number of packets that the interface deferred to
transmit because of detected collisions or timeout events.
Brief information of interface(s) under
route mode:
Brief information about Layer 3 interfaces.
Link: ADM - administratively down; Stby -
standby
Link status:
• ADM—The interface has been administratively shut down. To
recover its physical state, use the undo shutdown command.
• Stby—The interface is operating as a backup interface. To see
the primary interface, use the display interface-backup state
command in High Availability Command Reference.
Protocol: (s) - spoofing
If the data link layer protocol state of an interface is shown as UP,
but its link is an on-demand link or not present, its protocol attribute
includes the spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The physical link of the interface is up.
• DOWN—The physical link of the interface is down.
• ADM—The interface has been administratively shut down. To
bring up the interface, use the undo shutdown command.
• Stby—The interface is operating as a backup interface.